Open topic with navigation

District and state contacts

You can specify contact information for people responsible for the program at the district and state level. When you set up programs at schools, you can also add school program contacts. For more information, see Setting up school information [>>].

To enter or delete district contacts:You can do this if your role is District Administrator.[DA]You can do this if your role is School Administrator.[SA]

1

In the Program Management control bar, click Contacts.The Contacts page appears.

2

To add a district contact, click Add District Contact from the Actions menu. Search and select a district contact. To save and add another district contact, click Apply or to save and return to the Contacts page, click OK.

=

To delete a district contact, select the contact to be deleted and click Delete District Contact from the Actions menu. Click OK in the confirmation dialog.

To enter or delete state contacts:You can do this if your role is District Administrator.[DA]You can do this if your role is School Administrator.[SA]

1

In the Program Management control bar, click Contacts. The Contacts page appears.

2

Under State contacts, click Add to add a state contact. The State Contacts page appears. Note: To add additional rows for contacts, click Add Rows.

=

To edit a state contact, select the contact and click Edit. The State Contacts page appears.

=

To delete a state contact, select the contact and click Delete. Click OK in the confirmation dialog and skip the remaining steps.

3

Enter the information as required and click OK.

4

To save and continue setting up the program, click Apply or to save and return to the Program Setup page, click OK.

www.powerschool.com
Tel: 866-434-6276
Email: smssupport@powerschool.com

Copyright 2015-2016 PowerSchool Group LLC and/or its affiliate(s). All rights reserved. All trademarks are either owned or licensed by PowerSchool Group LLC and/or its affiliates.