Open topic with navigation

Staff Scheduling Properties record

This view of a staff record is for use by schools that employ secondary scheduling [>>].The record contains preferences about the staff member's full-time teaching loads and maximum numbers of students [Figure 274]. Since these preferences apply district-wide, a District Administrator sets this information. Thereafter, a School Administrator can adjust the values as required to facilitate automatic scheduling.

Figure 274 : Staff Scheduling Properties

The record also contains preferences regarding courses, rooms, and time restrictions. Note: Scheduling preferences apply only to teachers, not to School Administrators, secretaries, and teachers on leave-of-absence. Note: The PowerSchool SMS Master Schedule Builder schedules a teacher based on her course preferences. A teacher with no course preferences is not scheduled automatically (but a School Administrator can do so manually).

To set scheduling defaults [You can do this if your role is School Administrator.SA]:

1

Locate and view a staff record [>>]. The Edit Staff Demographics page appears.

2

In the control bar, click Staff Scheduling. The Staff Scheduling Properties page appears.

3

Enter or change Information, which includes:

=

Scheduling Load: A load expressed in terms of hours per day. Select District default (5.0000) or Override, for which you can type a number of hours. Note: PowerSchool SMS does not accept zero. Note: A course scheduling load is a value that reflects the number of hours of instruction for that course. For example, the District Administrator could set a course's scheduling load at 1.0 where that course that meet six hours a week over one term, and to 0.5 for a course that meets three hours a week for one term. Thus, a teacher with a scheduling load of 4.0 could teach two 1.0 courses and four 0.5 courses.

4

Set Course Preferences:

a

Under Course Search, find one or more courses using Basic or Detailed search [>>].

=

Or, for Course number, enter the number of one or more courses. Separate each number with a comma.

b

Under Search results, select one or more courses.

c

Click Add to add the selected courses to the Preferred Courses list.

d

For each course, under Preference, select a preference level.

=

The default level is 5 on a scale of 1 to 9 (where 1 is the most preference). Since the Master Schedule Builder does not automatically schedule a course with a preference of 9, the administrator can set this level for a course that she intends to schedule manually.

5

Set Room Preferences:

a

Move one or more rooms from the Available Rooms list to the Selected Rooms list.

b

In the Selected Rooms list, use the up and down arrows to adjust the order of the rooms in the list. A room higher in the list takes priority over a room lower in the list.

6

Set Time Restrictions:

=

Teacher is available at all times: Indicate that the teacher is available for scheduling during all regular school hours

=

Teacher is not available at the following times: Indicate that the teacher is not available for scheduling on specific days of the week or at specific times of day. Caution: At a school that employs relative days [>>], do not set teacher time restrictions.

=

For Full day Restrictions, select one or more days of the week.

=

To set Time-of-day restrictions: In the Actions menu, click Add Time Restriction and set the Day, Start Time, and End Time.

7

Click Save.

Or [You can do this if your role is District Administrator.DA]

1

In the Admin menu, click District Setup. The District Setup page appears.

2

Under District, click District Calendar. The District Calendar page appears with a list of calendars.

=

The calendar are classified by Type: "Historical" (typically, several instances), "Active" (one only), or "Planning" (one only).

3

In the Work with column, select the "Planning" calendar's check box and click OK. The Planning Calendar's District Setup page appears [Figure 180].

4

Under District, click Next Year Preparation. The Next Year Preparation page appears.

5

Under Step 1, click Staff Scheduling Defaults.

6

Set options.

7

Click OK.

Staff placeholder

To take into account a staff member that the school expects to bring in for the next school year, the School Administrator can create a placeholder in the Planning Calendar. Using one or more placeholders, the School Administrator can schedule courses before hiring is not complete.

To create a staff placeholder [You can do this if your role is School Administrator.SA]:

1

In the Admin menu, click Scheduling. The Scheduling page appears.

2

Click Staff Setup. The Scheduling Staff List appears.

3

From the Actions menu, select Create Placeholder.... The Staff Scheduling Properties page appears.

4

Enter a Name.

=

Enter a one-word name. PowerSchool SMS uses this as a last name for search purposes.

5

For Department, move one or more departments to the Selected departments list.

6

Set Teaching Load, Course Preferences, Room Preferences, and Time Restrictions as for any other staff member [>>].

7

Click OK.

When necessary, such as when a staff member is hired, the School Administrator can convert a placeholder, that is transfer all of that placeholder's scheduling properties to a staff record. When the conversion is complete, PowerSchool SMS deletes the placeholder record.

To convert a staff placeholder [You can do this if your role is School Administrator.SA]:

1

In the Admin menu, click Scheduling. The Scheduling page appears.

2

Click Staff Setup. The Scheduling Staff List appears.

3

Click All Placeholders and locate the placeholder under Staff Search Results.

=

Or click All Staff and locate the placeholder under Staff Search Results.

4

Select the placeholder.

5

From the Actions menu, select Convert Placeholder.... The Convert <placeholder name> to Staff Member page appears.

6

Search for a staff member.

=

Or, click All Staff.

7

Under Staff Search Results, select the staff member.

8

Click OK.

www.powerschool.com
Tel: 866-434-6276
Email: smssupport@powerschool.com

Copyright 2015-2016 PowerSchool Group LLC and/or its affiliate(s). All rights reserved. All trademarks are either owned or licensed by PowerSchool Group LLC and/or its affiliates.