Open topic with navigation

Grade level setup

The District Administrator specifies the grade levels taught at district schools. A School Administrator chooses from grade levels provided by the district [Grade level specification >>]. While the District Administrator can choose any name for a grade level, typical grade levels include:

For example, an elementary School Administrator might choose the following: KA, KP, 1, 2, 3, 4, 5, 6, and PE. A high School Administrator might choose 9, 10, 11, 12, and PE.

To choose the grade levels to use in a school: You can do this if you are a School Administrator.[SA]

1

In the Admin menu, click School Setup. The School Setup page appears.

2

Under School, click Grade Levels (setup list). The Grade Levels page appears with a list of grade levels available for use in the school.

3

In the Use column, select the check boxes of the desired grade levels.

4

Click OK.

Grade level specification

Each school must specify the grade levels available at that school. A School Administrator selects grade levels defined for use across the district by a District Administrator [>>]. A grade level definition consists of a name and a description; for example, grade level 2 could be named "2", "02", or "Two".

Caution: If the District Administrator removes a grade level [>>], information in the Active Calendar could be lost.

Table 35: Permissions pertaining to grade levels

Pearson
Always Learning
www.pearsonschoolsystems.com 
Tel: 866-434-6276
Email: psstechsupp@pearson.com